Troubleshooting Henderson Heat Pumps I

Silverstate Refrigeration & HVAC

Heat pumps are effective HVAC solutions to keep your Henderson house warm during winters and cool during hot summers. They operate on the mechanism of heat transfer from earthen source or to earthen source using earthen thermal energy.

Here are the common problems faced by Henderson citizens and their troubleshooting solutions.

In case of “No Heating”

• First check the position of the switch and then check if the thermostat is set above the room temperature and is on the heat settings.

• Check the status of circuit breaker, whether it is working and not blown away.

• If your HVAC circuit breaker is getting tripped again and again, it indicates a problem of short circuit. You need to call Silverstate HVAC, the BBB A+ air conditioning repair Henderson contractor.

• Sometimes the motor stops working due to overload, so click the reset button near the motor.

• Check if the thermostat is working on other settings, if not, it means it is faulty and needs to be fixed or replaced.

• Call or HVAC technician if the above, troubleshooting heat pumps measures don’t work.

If there are Temperature Related Problems

• If the room temperature goes high or drops low, it means that the thermostat was not properly installed or is not properly calibrated, and need to be reinstalled or replaced.

• If the heat pump keeps turning on or off frequently, it means that the filter is getting clogged or the blower is not working properly.

We will see more troubleshooting tips for heat pumps in “Troubleshooting Henderson Heat Pumps II”